4 Attachment(s)
Da Vinci 1 hot end and extruder replacement
I designed a new carriage to replace the Da Vinci 1 hot end and extruder. I used a Hexagon hot end and MK8 extruder. It works great. My Da Vinci printer has been converted to a Ramps/Arduino controller. I do not know if this will work on a Da Vinci that has not been converted to a different controller.
It uses linear bearings and there is a 15mm and a 16mm bearing version on the thingiverse files.
Here are the thingiverse files:
http://www.thingiverse.com/thing:665620
http://3dprintboard.com/attachment.p...tid=4721&stc=1http://3dprintboard.com/attachment.p...tid=4722&stc=1http://3dprintboard.com/attachment.p...tid=4723&stc=1http://3dprintboard.com/attachment.p...tid=4724&stc=1