3 Attachment(s)
Print warping but not off the table
ok this is weird and hard to explain it is like the part is warping or the extruder is pushing the materiel in the pictue below is the directions the warpage is leaning towards
and it gets worse the taller it getshttp://3dprintboard.com/attachment.p...tid=4657&stc=1
i have heard people saying leaning towards the right or left but this is totally different directions
http://3dprintboard.com/attachment.p...tid=4658&stc=1http://3dprintboard.com/attachment.p...tid=4659&stc=1