Z18 users printing movable parts models and settings

Has anyone had success printing moveable 3d prints on a Z18?
Been experimenting with printing moving parts like:http://www.thingiverse.com/thing:608397
http://www.thingiverse.com/thing:53451
They always print as a rock solid sealed object impossible to move correctly as per its use.

http://i.imgur.com/ydhNV0b.jpg

Tried Standard/ High settings and my own custom profile which seems to get me the cleanest prints:

• 0.15mm
  
• 5th Gen High Base
  
• As default offset
  
• 20%infill
  
• 200 °
  
• Roof layer count 4
  
• High
  
• 90mm/s
  
• Shells 2
  
• Outlines 15

Hi there

I would reduce filament amount.
Your shell is to thick, therefore moving parts can't move properly.
Somethig like this:
"feedDiameter": 1.80,
"feedstockMultiplier": 1.01,
If still no good, then increase the number of feedstock furthe more.

If you are using Makerbot filament then you should not have problems with it.

awesome thank you so much worked a treat!