2 Attachment(s)
First print on 'new' (used) Qidi x-cf pro. tips please!!
Here is my first go at 3dbency. It took quite a few level test prints to get PLA to stick at ALL. I ended up doing a -0.15 Z offset that seems to have got me going. However, even with that, it barely took any tweak at all, and it popped off. I feel that its too easy. I have a used textured baseplate. I'm afraid to give it any more negative z because I dont want to crash the nozzle. It seems the M6 ones are harder to find, and I ordered steel ones from qidi direct since I couldnt find any high temp ones on amazon at a M6.
ANyway, here is what he looks like:
Attachment 19169Attachment 19170
First layer is slowed to 10mm/s.
Temp 210, bed 60