Control, Prepare missing after SKR Mini E3 V1.2 install
I am a newbie with a 3 months old Ender 3 Pro, my first one. I purchased, installed and loaded a new SKR Mini E3 V1.2 mobo. The LCD panel lit up as usual without problems. I selected 'print from card' which showed the micro sd card had 2 files, FIRMWARE and test, as I recall. Then I put the sd card into a micro-sd to SD card adapter, which I hoped to use, and plugged it into the card slot but it didn't work. I fiddled with it a little, then removed the adapter and discarded it. I then removed the card and copied it onto my PC for safekeeping. I also added 2 short, simple .gecode files to check out the printer. I put it back into the printer and turned it on. The panel came on listing several entries but Prepare, Control and Print from Card were missing. I opened and scrolled each item, even clicking on 'Initiate EEPROM' but without success. I plugged and re-plugged the sd card, restarted the printer several times with no luck. Put the sd card back into the PC and both original files plus the 2 .gcode files I added were still there. This exhausts my meager knowledge of things to do and I surely hope someone can help me out! Thank you!
Control, Prepare missing after SKR Mini E3 V1.2 install
Thanks Gigo! I don't think I'm doing everything right to answer you--this procedure just seems wrong, like I'm making a new post. But I'll try anyway! The lcd screen doesn't show Prepare, control, etc like it used to, and I can't find "print from card" as I used to. I want to print a quick, simple file.If I go from the Info screen to >Configure (scroll)> Initiate Media and press it, nothing happens. There is also "Media Released" which I didn't press.If I'm in Info>Configure(scroll)>Advanced Settings> Initialize EEPROM> gives a choice of cancel or initialize; if I select Initialize, nothing happens.If you can see this, I'll be very happy!