Makrtoolbox Mk1 3D Printer Kit
Looks like a new kickstarter project has just launched. This one is for a kit to build the Makrtoolbox Mk1 3D Printer. The Kickstarter project for the Mk1 can be found here: https://www.kickstarter.com/projects...er?ref=kickspy
Details about the device can be found at the 3DPrint.com article here: http://3dprint.com/4480/makrtoolbox-mk1-3d-printer/
The General specs for the Mk1 are as follows:
- Build Volume: 6"x6"x6" (150mmx150mmx150mm)
- Resolution: <50 microns (0.05mm) X/Y & 100 microns (0.1mm) Z
- Nozzle Size: 0.3mm or 0.4mm
- Hot End: J-Head ( easily replaceable, upgradeable)
- Filament Diameter: 1.75mm
- Materials: Tested with PLA and Nylon
- Power: Includes 110v Power adapter. 12v 6amp
- Controller: Ramps 1.4 board (Arduino based)
- Software: G-Code compatible (Using Marlin Firmware) / Free Open
- Source programs like Repetier Host or Pronterface
Here is a picture of the device:
https://s3.amazonaws.com/ksr/assets/...jpg?1400450756