Hi all, Im very new to this. Im using a wanhao 5s mini and is seems to not put enough material on the left of the plate and too much on the right (See bellow). Any help would be great Thanks.
http://3dprintboard.com/attachment.p...tid=4251&stc=1
Printable View
Hi all, Im very new to this. Im using a wanhao 5s mini and is seems to not put enough material on the left of the plate and too much on the right (See bellow). Any help would be great Thanks.
http://3dprintboard.com/attachment.p...tid=4251&stc=1
Looks like a very unlevel bed to me. Have you leveled it?
That was my first thought, I have done it 3 or 4 times now.
You may have leveled it, but have you calibrated it? The bed may be level to the ground, using a level, but if it's not calibrated to the extruder axis', it won't print right. Mine did the same thing till I calibrated it.
Sorry I assumed that's what was meant by unlevel, I have calibrated it