airscapes
Engineer

I would guess the fan that runs all the time is to cool the hot end and the others are parts fans. When you configure your slicer you tell it when...

you got me now.. can I try and print it for you? Just really curious to see how it would come out. if yes, pm me and I will send you my email...

May want to try making the part more blocky with out the nice rounded ends. This way you have nice adhesion to the build plate.. Looks real nice as...

Thanks for the detailed explanation! I do not normally make TPU parts that large and have never had an issue with them warping but I also don't...

TPU is tricky stuff. I do not have this printer but for me, with a direct extruder style printer, and TPU I find the best results are with nozzles...

Never used a resin printer but have been printing FFF for years. my holes are always .4mm smaller than the designed model.. So when I design anything...

you can try a magnetic PEI powder coated system. TPU comes off without too much effort but you initial layer need to be exactly right no squish.....

cut a piece of plexiglass/Lexan and forget about printing it, you will not be able to see through 5mm .

I kind go the other way, I make my own .95mm nozzles from older smaller ones and print with .5mm Layers with larger items. Never used PETG with CF...

If it fits, why not? Lots of aftermarket systems like buildtek and others..

It means, learn how the slicer program works and the quirks related to your printer so you can get a good result.

I would suggest doing your part design and then have the model printed by a printing service. You should do a bit more research on types of filament...

Never printed a 3 day part.. my build volume is only 8x10x8.. My enclosure has no extra heater anymore, it is no needed. For ABS the heat of the...