Results 1 to 6 of 6
Thread: Creating a Cheap 3D Print Bed
-
11-01-2014, 04:17 PM #1
Creating a Cheap 3D Print Bed
3D printing enthusiast Andy/akdrama has created an entertaining and clear Instructable which should motivate anyone who wants to save money and create their own print bed to try out this quick and easy project. For this printer bed for your 3D printer, you only need a few materials — and less than $5. It’s also easy to remove once you want to replace it. For more info, check out the full article: http://3dprint.com/21804/instructable-print-bed/
Below is an image of the printer bed in use:
-
11-01-2014, 08:07 PM #2
Good idea but I don't think I like the porous surface, I have come very fond of the finish off clean Kapton and blue tape.
Hex3D - 3D Printing and Design http://www.hex3d.com
-
11-01-2014, 08:48 PM #3
- Join Date
- Aug 2014
- Posts
- 5
"Warning: This print bed is not for you if you use a heated print bed."
Why?
Then, print ABS unsuitable?
-
11-02-2014, 03:13 AM #4Hex3D - 3D Printing and Design http://www.hex3d.com
-
11-02-2014, 07:29 AM #5
- Join Date
- Aug 2014
- Posts
- 5
Thanks Geoff : )
-
11-13-2014, 10:41 AM #6
oh, nice. so this print bed is for people don't have a heated bed.
Good stuff!
Print not sticking to base plate?
Yesterday, 01:26 PM in General 3D Printing Discussion