Close



Results 1 to 10 of 10
  1. #1

    3D Printed Hexapod Robot

    There have been so many incredible creations thanks to 3D printing. One Israeli engineer named Jonathan Spritz has created something which is quite interesting.... a 3d printed hexapod robot, and named it Billy.

    The robot which was 3D printed on an UP! Plus 2 3D printer and is controlled with a smartphone via bluetooth thanks to an Arduino Leonardo board, is able to traverse all kind of terrain. More details on this incredible 3d printed hexapod, as well as lots of pictures and videos may be found here: http://3dprint.com/16953/billy-3d-pr...robot-hexapod/

    Check out a picture of Billy below:

  2. #2
    Here is a bit of an update sent to us by Jonathan. Stay tuned for more!


  3. #3
    Super Moderator Geoff's Avatar
    Join Date
    Nov 2013
    Location
    NSW, Australia
    Posts
    1,826
    Add Geoff on Thingiverse
    Mines faster not ready to travel the world just yet however ...

    Last edited by Geoff; 11-24-2014 at 10:30 PM.
    Hex3D - 3D Printing and Design http://www.hex3d.com

  4. #4
    It's so cute, I love it. I hope I can make one too!
    I like the following words.
    if it wasn’t challenging we wouldn’t be doing it!”

  5. #5
    Engineer-in-Training beerdart's Avatar
    Join Date
    Feb 2014
    Location
    CT
    Posts
    345
    Very cool my son designed printed and coded a six leg 18 servo hexapod. It's still a work in progress but getting there.
    Attached Images Attached Images

  6. #6
    Fantastic. I am looking forward to its working video!
    All parts except wires was made by 3D printer?

  7. #7
    Student
    Join Date
    Jan 2015
    Location
    Antwerp - Belgium
    Posts
    13
    I also made an hexapod. (I designed it in Solidworks, saved as STL, sliced with Cura, and printed it on my own 3D printed/build Ecksbot)
    controllable with a PS3 remote controller ...
    (I'm using MG996R servos and some small ball-bearings)

    Is quite fast, and can not only walk/crawl, but also perform gestures ...
    (that's why I'm using a PS3 controller, they have lots of buttons, lol)
    Body height is adjustable, walking gait can be selected, it can "sit" on it's "back", put a few legs in the air etc ...



    Best regards from Belgium,
    Kris

  8. #8
    Engineer-in-Training beerdart's Avatar
    Join Date
    Feb 2014
    Location
    CT
    Posts
    345
    Thats awesome Andy..

  9. #9
    Back in September, we heard about and covered Billy the hexapod robot, made by Jonathan Spitz, an Israeli engineer and PhD student. Billy was a cute little robot, and he now has a more advanced model as a brother: Charlie the robot is Spitz's latest creation. Charlie has four micro DC motors, an Arduino Micro brain that receives Bluetooth signals, and Pololu Baby Orangutan controllers to drive the motors. The body is entirely ABS, printed on an UP2 printer from Easy3D, and all the parts took about 24 hours to print. Check out more details about Charlie the robot in the full article: http://3dprint.com/36869/charlie-3d-printed-robot/


    Below is a photo of Spitz's robots, Billy (right) and Charlie (left):

  10. #10
    Technician -willy-'s Avatar
    Join Date
    Dec 2014
    Location
    Sorrento Maine
    Posts
    82
    Fascinating, dont think I will print one unless some one wants me to print one for them.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •