Results 1 to 2 of 2
-
05-16-2014, 02:37 PM #1
- Join Date
- Apr 2014
- Location
- Echuca Victoria
- Posts
- 60
Saving files to SD card for printing.hit n miss
Hi All,
Ok this one seems weird but used one Stl, ran it through RepG, etc etc saved it to Sd card and all printed well.
Next time around I resized the object, ran it back though RepG again, says it saved to SD card BUt the machine still only recognises the original print file on card.
Experimented by making duplicate of original file on SD card and machine shows both of the original files, just refuses to acknowledge the modified version, the modified version printed fine when connected to machine via PC ??
Anyone have any thoughts other than I need a new hobby ???
Steve
-
05-16-2014, 02:55 PM #2
- Join Date
- Apr 2014
- Location
- Echuca Victoria
- Posts
- 60
Ahhhh,
Figured it out sort of.
Once PC was hooked up to printer and print was completed, I then re-saved new file to Sd card and it shows up on card when put in printer this time.
Guessing for some reason it is to do with having to complete heat settings etc whilst connected to printer via Pc..all programming gremlins that I have to learn.
steve
Extruder not feeding during print,...
Today, 01:59 AM in Tips, Tricks and Tech Help