Close



Results 1 to 5 of 5
  1. #1

    Good elastic material that can be used for push buttons?

    Hello! I have a project where I need to print push buttons. It's not going to be mechanical, but instead squishy, like rubber.
    I tested with PolyFlex, and when having infill it's quite solid, so it can't really be deformed that much when pressing in.

    I need it to be able to compress when I'm pushing it, preferably with infill inside.

    Do you know of any filaments that would be more suitable for my purpose?

    Thanks in advance!

  2. #2
    Staff Engineer Davo's Avatar
    Join Date
    Nov 2013
    Location
    Atlanta, GA
    Posts
    1,024
    Follow Davo On Twitter Add Davo on Facebook Add Davo on Google+ Add Davo on Shapeways Add Davo on Thingiverse
    Use a lower density infill, like 5%. You should find that changing the number of solid perimeters will greatly affect the flexibility when deforming the surface.

  3. #3
    Super Moderator curious aardvark's Avatar
    Join Date
    Jul 2014
    Posts
    5,661
    yep also try ninjaflex or filaflex. They are both softer than polyflex.

    But davo is right too :-)

  4. #4
    Thanks for the answers!

    I tried 5% with PolyFlex, grid pattern. It's very solid still. Buttons are quite small, only 1-2 cm o. So I switched to 0% infill, but it's still very solid, because of the walls.
    I'm using a Trinus and I don't want to use any material that needs a special extruder.

    Which one is softer, NinjaFlex or FilaFlex?

  5. #5
    Super Moderator curious aardvark's Avatar
    Join Date
    Jul 2014
    Posts
    5,661
    both identical in my opinion.
    Don't need anything special extruder wise.
    Just need to be printed a lot slower than polyflex.

    Around 10mm/s for soft tpu's (which is what ninjaflex and filaflex are). 240-250ish extruder temp and I never bother heating the bed for rubber tpu's they'll pretty much stick to anything cold.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •