Want to put a 2 wire connector on my 40 mm fan.

[CharlieBot]

I have little to no experience with wiring. i'm trying to put a connector on my 40 mm fan so that maintenance and such is easier. Dose anyone know what connectors i need? in case it matters my printer is a Qidi tech 1

Thanks everyone. its all done now up and running!

[number40Fan]

As long as you get both ends to the connector, I don't see why it would matter which one you install.

[curious aardvark]

spade connectors are pretty straight forward.
This sort of thing: https://www.amazon.com/Hilitchi-100p...ade+connectors
Your local buck store should stock them, or any budget hardware store.

My cooling fans are just wires twisted together and taped. But I have fitted an on off switch to them both.