Close



Results 1 to 4 of 4
  1. #1
    Engineer-in-Training
    Join Date
    Jan 2016
    Posts
    249

    Wire saver for Flashforge Creator Pro?

    I started printing wire saver for Dremel 3D printer and found out that the plastic piece that go on top of the extruders already have a small cylinder where the wires go into but ithat cylinder won't keep the wires from bending. Any suggestions?

  2. #2
    Technologist
    Join Date
    Apr 2016
    Posts
    118
    Sorry, what part do you mean?

    Can you post a picture of it?

  3. #3
    Engineer-in-Training
    Join Date
    Jan 2016
    Posts
    249
    http://www.thingiverse.com/thing:1549265

    The parts were made for Powerspec 3D Pro and 3D Ultra printers that have a flat black plastic piece on top of the extruders and where filaments go through the holes. They were supposed to keep the wires from bending as the extruders go back and forth. The Flashforge Creator Pro at the program for mentally handicapped people has a plastic piece on top of the extruders with a short cylinder supposed to hold the wires but it didn't work.

  4. #4
    Technologist
    Join Date
    Apr 2016
    Posts
    118
    Ahh, OK, I used this design http://www.thingiverse.com/thing:616895

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •