Results 1 to 4 of 4
Thread: Wooden Makerbot Replicator Dual
Threaded View
-
05-03-2017, 11:06 AM #1
- Join Date
- May 2017
- Posts
- 1
Wooden Makerbot Replicator Dual
I have a Replicator Dual, wooden frame. I only have one stepper installed at a time, the right stepper. I had the setting on the actual printer set to "Single".
Anyway, the communicator cable to the right stepper was shorting out, so I removed the right stepper and installed the left stepper, and then I set the printer to "Dual".
I can successfully load filament , but when I home the print head, I get a horrible clicking sound, it appears as if my extruders/steppers are off center.
Any thoughts how to fix this?
https://vimeo.com/215857736
<iframe src="https://player.vimeo.com/video/215857736?autoplay=1" width="640" height="360" frameborder="0" webkitallowfullscreen mozallowfullscreen allowfullscreen></iframe>
<p><a href="https://vimeo.com/215857736">IMG_2233</a> from <a href="https://vimeo.com/user3741539">ZN</a> on <a href="https://vimeo.com">Vimeo</a>.</p>
Which 3d printer for small...
03-27-2024, 05:24 PM in General 3D Printing Discussion