Close



Results 1 to 3 of 3
  1. #1

    Monoprice Select Mini Z axis problem

    Been using my 3d printer for months with no serious issues, minus some clogging. I printed off some mods and replaced the hotend with e3d with zero offset. While inside I added a second fan (1 for hotend, 1 for part cooling). Also added the z axis base stabilizers. After I reassembled the printer my Z axis is not working.

    I removed the threaded rod and checked the motor. It turns on but seems to go in only 1 direction.
    So, I'm guessing I have extra tension prevent from the threaded rod from spinning loosely? But don't understand the single direction. Need help. Any ideas?

  2. #2
    Engineer Marm's Avatar
    Join Date
    Sep 2014
    Posts
    630
    Add Marm on Thingiverse
    Undo the changes made to the Z axis, and see if that helps.

  3. #3
    Removed the motor completely. The motor works but only 1 direction

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •