Close



Page 2 of 2 FirstFirst 12
Results 11 to 13 of 13
  1. #11
    Student
    Join Date
    Dec 2016
    Posts
    11
    Here is the STL file and the gCode.

  2. #12
    Looks simple enough!
    I have sliced it in S3D and will try a print tomorrow.

    Herewith a basic GCODE that should suit your printer: http://sendanywhe.re/2W78CW No guarantees though!

  3. #13
    Here's my first go at printing the object. The printer was sat @ -5 degrees C last night, so there is a little bit of warping going on!

    https://drive.google.com/file/d/0B5F...ew?usp=sharing
    https://drive.google.com/file/d/0B5F...ew?usp=sharing

    Generally though, everything looks as I would expect. A little bit of wobble, but this is expected with these operating temps, as the printer is calibrated for room temperature and really struggles when it gets that cold!

Page 2 of 2 FirstFirst 12

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •