Close



Results 1 to 8 of 8
  1. #1
    Super Moderator curious aardvark's Avatar
    Join Date
    Jul 2014
    Posts
    8,818

    3d printed acorn

    I live in the middle of the new english national forest. This year's been a very good year for acorns on a lot of the small young oak trees.
    After a single success and many failures in electroplating acorns.
    I decided it would be easier to simply design and print a plastic acorn instead.

    Crashed openscad a few times in the process. It really doesn't like more than 2000 objects.
    But in the end I came up with a pretty good fake acorn.
    Sliced it with flashprint (cutting it in half also crashed openscad) to make a brooch, printed in reprapper tech wood coloured pla and hand coloured the cup.









    Just printed one with an added twig on the base, waiting for printbite to cool, not sure if the twig is tough enough to take a hit with my hammer :-)

    On the whole I'm pretty pleased with the result - and this will be much easier to electroplate than a real acorn.

    Got impatient - twig survived the hammer :-)


    Used a darker green for the cup, looks much better in the flesh - so to speak.

    Using decent safety clasp brooch backs - should be able to sell these.
    So, no - the .scad an .stl files are not going to be made available :-)

    And for the chap who said 0.1 and 0.2 layer height was rough. these were printed at 0.2mm on a replicator dual clone at 60mm/s printspeed.
    I would gain nothing at all using a smaller layer height.
    Last edited by curious aardvark; 10-27-2016 at 10:05 AM.

  2. #2
    That is very very cool. And goes to show what a finely printer is capable of. Well done!


  3. #3
    Student
    Join Date
    Feb 2016
    Location
    UK
    Posts
    10
    Alchemist

    Did you try using a sealer on the real acorn before applying the conductive paint?

  4. #4
    Super Moderator curious aardvark's Avatar
    Join Date
    Jul 2014
    Posts
    8,818
    no - but that's a very good idea :-)
    But the problem with real acorns is they dry out and shrink.
    Once you cut them in half, you have to glue them back together and they shrink a lot faster. The sealer would help with that.

    Plus most trees have dropped them now, it's a fairly short harvest window.
    Might try the sealer next year :-)

    So the artificial ones are better as i can make them all year round :-)

  5. #5
    This is really cool. I wonder if it will crack and shrink later on.
    They always seem to pop in the winter as the moisture gets sucked out .

  6. #6
    Super Moderator curious aardvark's Avatar
    Join Date
    Jul 2014
    Posts
    8,818
    It's plastic - why would it shrink :-)

  7. #7
    Technician
    Join Date
    Nov 2016
    Location
    france
    Posts
    51
    Follow yoda3d On Twitter Add yoda3d on Facebook Add yoda3d on Google+ Add yoda3d on Thingiverse
    Very resembling

  8. #8

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •