Close



Results 1 to 8 of 8
  1. #1
    Engineer-in-Training iDig3Dprinting's Avatar
    Join Date
    Jan 2015
    Location
    UK
    Posts
    287
    Follow iDig3Dprinting On Twitter Add iDig3Dprinting on Facebook Add iDig3Dprinting on Google+ Add iDig3Dprinting on Thingiverse

    Question What do you like to print on for finish and adhesion?

    So we would like to know what people prefer to print on: tape, glue or specialist boards?

    We created a poll on our Google+ page, we had to do it somewhere where we could try and pool all the results.

    If you don't want to vote in the poll that is obviously ok but please leave your comments on your preferred choice and why.

  2. #2
    Engineer-in-Training ssayer's Avatar
    Join Date
    Oct 2014
    Location
    Lakeville, Michigan
    Posts
    369
    Glass for PETG
    Gluestick on Glass for PLA

    Why? Because it works...

  3. #3
    Engineer-in-Training iDig3Dprinting's Avatar
    Join Date
    Jan 2015
    Location
    UK
    Posts
    287
    Follow iDig3Dprinting On Twitter Add iDig3Dprinting on Facebook Add iDig3Dprinting on Google+ Add iDig3Dprinting on Thingiverse
    Quote Originally Posted by ssayer View Post
    Glass for PETG
    Gluestick on Glass for PLA

    Why? Because it works...
    Have you tried any proprietary print pads?

  4. #4
    Student
    Join Date
    Feb 2015
    Location
    Pinehurst North Carolina
    Posts
    9
    For ABS: Thin ABS/acetone slurry on kapston sheet provides great sticking power and glass-smooth finish.


    Chris

  5. #5
    Engineer-in-Training iDig3Dprinting's Avatar
    Join Date
    Jan 2015
    Location
    UK
    Posts
    287
    Follow iDig3Dprinting On Twitter Add iDig3Dprinting on Facebook Add iDig3Dprinting on Google+ Add iDig3Dprinting on Thingiverse
    Quote Originally Posted by Chris Knowlton View Post
    For ABS: Thin ABS/acetone slurry on kapston sheet provides great sticking power and glass-smooth finish.


    Chris
    ABS slurrys good

  6. #6
    Slurry on glass for everything.


  7. #7
    Super Moderator curious aardvark's Avatar
    Join Date
    Jul 2014
    Posts
    8,818
    can't vote in poll without a google plus account and I don't want one of those :-)

    whay not use surveymonkey or a similiar service ?

    answers is glue stick anyway.
    So far haven't found anything that won't stick to it.

  8. #8
    Engineer-in-Training ssayer's Avatar
    Join Date
    Oct 2014
    Location
    Lakeville, Michigan
    Posts
    369
    Quote Originally Posted by iDig3Dprinting View Post
    Have you tried any proprietary print pads?
    BuildTak

    Also, painter's tape, hair spray, etc., etc., etc.

    Nothing better (for me) than what I already posted...

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •