Close



Search:

Type: Posts; User: BLKKROW

Page 1 of 13 1 2 3 4

Search: Search took 0.01 seconds.

  1. Replies
    56
    Views
    12,282

    I bought my BL Touch from Colin at Makerfarm. ...

    I bought my BL Touch from Colin at Makerfarm.

    I got it working, and was having issues with the probe speed.
  2. Replies
    56
    Views
    12,282

    Mine looks similar. I found a work around from...

    Mine looks similar. I found a work around from the G92 command.

    I changed the following while trying to find my Z-Offset:

    #define Z_MIN_POS -10
    #define MANUAL_Z_HOME_POS 0

    This allows me to...
  3. Replies
    56
    Views
    12,282

    Do you happen to know what setting that is? I...

    Do you happen to know what setting that is? I figured that is what is going on but the only option I can find is Safe Z homing, but if I disable that when it runs G28 it does it in the corner of the...
  4. Replies
    56
    Views
    12,282

    Anyone want to give me a hand? I have the BL...

    Anyone want to give me a hand?

    I have the BL Touch installed and responding. A G28 command homes X and Y and then Z. However, after it probes the Z axis twice it raises the Z axis a few mm. Is...
  5. Replies
    56
    Views
    12,282

    If you visit their website: ...

    If you visit their website:

    http://www.antclabs.com/store

    You can see Makerfarm is an authorized reseller.
  6. Replies
    56
    Views
    12,282

    May I ask, why you believe Makerfarm are selling...

    May I ask, why you believe Makerfarm are selling clones?
  7. Replies
    83
    Views
    11,899

    It could also be a faulty Reprap Discount LCD.

    It could also be a faulty Reprap Discount LCD.
  8. Replies
    83
    Views
    11,899

    You got it. The other options is to switch to the...

    You got it. The other options is to switch to the A4982 driver. I attempted to use the DRV8825 driver and got weird artifacts.

    This is what you need to change:

    #define...
  9. Replies
    83
    Views
    11,899

    Real talk, once you level your bed, you should...

    Real talk, once you level your bed, you should not be using a Z-Offset. The first layer of the print should be above the bed by a very small amount. For example, I use a feeler gauge with a...
  10. Replies
    5
    Views
    1,355

    I use 14 AWG silicone wire. The silicone wires...

    I use 14 AWG silicone wire. The silicone wires can tolerate higher temperatures, similar to: https://hobbyking.com/en_us/turnigy-pure-silicone-wire-14awg-1m-red.html. They are also highly flexible...
  11. Replies
    56
    Views
    12,282

    Roxy, I have a silly question for you. My...

    Roxy, I have a silly question for you. My Printers are now running the RC8 Marlin 1.1 RCbugfix, from Dec 2016.

    I see the #define bltouch, do I just have to uncomment that and update the spacing...
  12. Replies
    83
    Views
    11,899

    Here are the files I used: ...

    Here are the files I used:

    https://www.dropbox.com/sh/lp88ldb90p1holg/AACe9eAyhovURcSY2iL5Ph0ya?dl=0

    Again, these are Beta designs and may have issues. I am testing them out currently.
  13. Replies
    83
    Views
    11,899

    I contemplated using integrated stepper motors...

    I contemplated using integrated stepper motors with the 8mm acme thread. However, I couldn't find a company that sold them in the proper length for a decent price. After searching for a few weeks, I...
  14. Replies
    83
    Views
    11,899

    I had to print the mount for the 8mm nut here is...

    I had to print the mount for the 8mm nut here is an example: ttp://imgur.com/a/WjSmz . I also printed a mount for a ball bearing to support the top of Acme Threaded rod.

    I chose the 8mm Acme...
  15. Replies
    83
    Views
    11,899

    I would highly recommend the Acme Threaded rod...

    I would highly recommend the Acme Threaded rod upgrade. I took a quick photo so please ignore the overall bad quality:

    http://imgur.com/SIq6Bsz

    I recently upgraded my threaded rods to 8mm Acme...
  16. Replies
    6
    Views
    1,235

    I cannot think of a specific guide, you just have...

    I cannot think of a specific guide, you just have to learn about the Marlin Firmware. Essentially the Marlin firmware that is run on your printer is a few text documents with settings that you can...
  17. Replies
    6
    Views
    1,235

    I upgraded my Z Axis recently to 8mm Acme (Lead...

    I upgraded my Z Axis recently to 8mm Acme (Lead Screw's): https://www.amazon.com/gp/product/B01IEYL642/ref=oh_aui_detailpage_o01_s01?ie=UTF8&psc=1

    This is a great upgrade to make on your printer...
  18. Replies
    6
    Views
    1,235

    Have you attempted to square the X Axis to the Y...

    Have you attempted to square the X Axis to the Y Axis? I don't know if this would solve your issue, but if the X Axis is skewed then it may cause this issue.

    Below is a picture of what I do to...
  19. I found the information through a Google search...

    I found the information through a Google search but there is no documentation. What you need is a 12V fan and connect it to D9 on Ramps.
  20. I have the part cooling fan controlled by the...

    I have the part cooling fan controlled by the RAMPS board. It turns on and changing speed depending on what it is printing, such as bridges, overhangs, etc.
  21. A part cooling fan is beneficial for the majority...

    A part cooling fan is beneficial for the majority of materials that you can print. Essentially what it is doing is cooling the filament as its being extruder making it stiffer. This helps while you...
  22. Replies
    83
    Views
    11,899

    I appreciate your opinion, I just left my...

    I appreciate your opinion, I just left my comments to help the OP.
  23. Replies
    83
    Views
    11,899

    I have been working with the Titan the last 2...

    I have been working with the Titan the last 2 days. I have it installed with a pancake Nema 17 motor and I have run into zero issues. The thing just keeps printing and I love the ease of use compared...
  24. I have a 12" Pegasus with direct drive and I...

    I have a 12" Pegasus with direct drive and I print TPU with no retraction and I slow the print speed to 25% of its normal speed. It prints stringy, so you can slowly increase the retraction until it...
  25. Replies
    83
    Views
    11,899

    You can certainly use the stock motor to run the...

    You can certainly use the stock motor to run the Titan, it will just provide a lot of Torque. This isn't an issue at all and will certainly push any filament you feed it. One of the advantages of...
Results 1 to 25 of 309
Page 1 of 13 1 2 3 4