Close



Search:

Type: Posts; User: Roxy

Page 1 of 20 1 2 3 4

Search: Search took 0.03 seconds.

  1. Agreed... But Open Source provides a very good...

    Agreed... But Open Source provides a very good proving ground for new ideas. Anybody can fork the code base and develop their concept. If the idea is good, it can be re-absorbed into the main...
  2. Your link doesn't work. So it is hard to find...

    Your link doesn't work. So it is hard to find out more about the printer in your picture. But I can tell you this much: It is a Prusa i3 Open Source derivative. And that means there is a...
  3. Thread: Marlin version

    by Roxy
    Replies
    4
    Views
    501

    Ah... I'm not sure how to answer. There are so...

    Ah... I'm not sure how to answer. There are so many i3's. And Prusa has his own fork of Marlin for his current i3's.

    But if you want to bring up a generic i3, you want to do it using...
  4. Replies
    1
    Views
    164

    Thank You for giving me permission to share my...

    Thank You for giving me permission to share my opinion here! My opinion is you have an agenda. It won't take much before one of the moderator presses the Ban button.
  5. Replies
    56
    Views
    7,728

    Did you do a M502 and M500 after changing the...

    Did you do a M502 and M500 after changing the values in your Configuration.h ? The latest RCBugFix has an option where you can use Z-BabyStepping and it will automatically adjust your Z-Offset.
  6. Replies
    9
    Views
    1,231

    You may do well just searching for and reading...

    You may do well just searching for and reading recent threads where people are asking about this or that type of printer. And of course, everybody has an opinion. I think you should get a RepRap...
  7. Replies
    0
    Views
    243

    Marlin Users: Please cast a vote!

    Please cast a vote about how to bring Marlin's RCBugFix to "Golden Release" status.

    https://github.com/MarlinFirmware/Marlin/issues/6188#issuecomment-290889693
  8. Just grab the latest RCBugFix and cross your...

    Just grab the latest RCBugFix and cross your settings over. A visual diff program like NotePad++ with the comparison plug-in works very well. It will take you more time to get NotePad++ running...
  9. Replies
    56
    Views
    7,728

    > I got it working, and was having issues with...

    > I got it working, and was having issues with the probe speed.

    If you got it from MakerFarm, it is my belief it is legitimate and not a 'clone'. But the thing is... This is kind of...
  10. Replies
    56
    Views
    7,728

    Where did you get your BL-Touch? How much did...

    Where did you get your BL-Touch? How much did you pay? There are a lot of counterfeit BL-Touches starting to show up and they don't behave like a BL-Touch. Some of them even need an inverted...
  11. Replies
    56
    Views
    7,728

    Also make sure your Configuration.h file looks...

    Also make sure your Configuration.h file looks like mine in this section. If you don't have things like mine, you won't be able to home in the center of the bed:


    // @section homing


    // The...
  12. Thread: STL editing.

    by Roxy
    Replies
    3
    Views
    558

    Blender does this stuff very well. Import the...

    Blender does this stuff very well. Import the .STL into blender. Use the create tool to make a cube. Stretch the cube to be the right height (but more like a column). And position it where...
  13. Replies
    1
    Views
    354

    You can try turning up the power to the stepper...

    You can try turning up the power to the stepper motor on the 'Step Stick' (assuming you have standard hardware). You can also modify the firmware and lower the max step rate and acceleration for...
  14. I bet you are not using Marlin! Marlin's Auto...

    I bet you are not using Marlin! Marlin's Auto Tune only takes 5 minutes even if you are going to run 5 or 6 cycles.

    You should see your LCD Display show the temperature going up and past the set...
  15. I would suggest you put together a kit such as...

    I would suggest you put together a kit such as the Folger Tech i3-2020. And then use it to print a few parts of your choosing. You will run into some problems and you will learn a huge amount...
  16. Replies
    21
    Views
    2,910

    If it is your first printer... It really is...

    If it is your first printer... It really is better to start with a Prusa i3 type machine. That will be easier to keep running. And it will be easier to get advice when you do run into a problem. ...
  17. Replies
    21
    Views
    2,910

    I have a GeeeTech printer. The quality is very...

    I have a GeeeTech printer. The quality is very poor. And it doesn't even really work. Who knows??? Maybe somebody out there has had a good experience with their Geeetech 3D-Printer, but I...
  18. Replies
    756
    Views
    167,378

    Sticky: Can you explain what you are trying to accomplish?

    Can you explain what you are trying to accomplish?
  19. Replies
    4
    Views
    871

    You can find it here:...

    You can find it here: https://github.com/MarlinFirmware/Marlin/tree/RCBugFix

    This is the most debugged version of the Release Candidate. A lot of bed leveling changes have been made. The...
  20. Replies
    4
    Views
    871

    Are you running RC-8's RCBugFix? There is a...

    Are you running RC-8's RCBugFix? There is a setting for #define BLTOUCH and it takes care of all the magic to get the BL-Touch set up.

    If you are not running it... You really should,...
  21. Replies
    56
    Views
    7,728

    Thank you for that information! That is very...

    Thank you for that information! That is very helpful to know about!

    And... The latest RC-8 RCBugFix has a number of new items to help BL-Touch users.
  22. Replies
    15
    Views
    4,448

    If you are fusing parts together that are printed...

    If you are fusing parts together that are printed in PLA... You should consider using Weld-On #4.

    Check out: ...
  23. Replies
    56
    Views
    7,728

    I do not know where you purchased your BL-Touch. ...

    I do not know where you purchased your BL-Touch. If you got it from Makerfarm, that reduces my concern about it being a counterfeit probe. But Antclabs (the maker of the real BL-Touch probe) is...
  24. Thread: Marlin version

    by Roxy
    Replies
    4
    Views
    501

    Latest RCBugFix is at: ...

    Latest RCBugFix is at: https://github.com/MarlinFirmware/Marlin/tree/RCBugFix
  25. Replies
    56
    Views
    7,728

    What problems are you seeing? We have a number...

    What problems are you seeing? We have a number of BL-Touch fixes in RC-8's RCBugFix branch now. So you might want to consider loading that into your printer. But one big problem is if you don't...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4