NEW M3D Promega

Has anyone looked into the newly releasing M3D Promega? It's available right now for less than $1200 and will retail for $3500. Thoughts?

http://sites.printm3d.com/promega.html

M3D Promega technical specifications:

Build size: 15.3 in / 38.8 cm build (cube - 15.3x15.3x15.3)
Printer Dimension: 20x20x22in / 50.8×50.8×55.8cm (cube)
Weight: 25 lbs / 11.3 kg
XY – 0.6 micron microstep resolution
Z – 50-750 micron layer resolution (dependant on nozzle size)
Up to 300mm/s motion (typical high quality printing at 45-60mm/s)
Heats Up to 300°C (420°C with thermocouple add on)
Connectivity: Ethernet with built-in Webhost
USB host
SD Card (for stand-alone mode)
Print from any web-enabled device
Runs off Gcode, sliced from STL and other 3D model file types
Compatible with all 1.75mm filaments (not included with printer)
Open electronics and hardware
Open firmware (Smoothie or Reprap firmware)
Open software (3rd Party Host Controllers)

https://3dprintingindustry.com/wp-co...cqelCvVN-1.png

(from: https://3dprintingindustry.com/news/...ations-116093/)