Definitely interested. I just finished my first build(12" i3v) and my Y bed is already warped pretty badly after 1-1/2 weeks of use.
Printable View
I don't see the hole for the screw that triggers the contact switch or the hole for bolting the plywood in the middle into those 4 slots.
TMJ I pm'd you. Take your pick as to which you cut I don't know the difference between them honestly...
Hi TechMasterJoe
Would u deliver to Switzerland?
tmj what is the weight on the 6061
here is some screen shots on weight apx 950 grams
i cut 23 out of 7075 T6 and the holes for the bed are are 2.52mm measured and can be tapped to 3mm or drilled
i will setup stuff to sell 12 of them this week the rest I'm going to be sending to Colin for other reasons ;-)
i have changed my mind about 6061 T6 it's to easy to bend 7075 is 6 times harder for next to no extra weight (10~20 grams or so)
you can stand on them zero flex
even with the holes
the plates are .200in apx 5mm thick
i will post pics and contact info soon
they will include the parts that i cut out something for you all to play with
the slots are 28mm wide the part i cut out are 2.0~2.4mm smaller (waterjet)
Joe..pm sent
Dibs on one of them :)