-
For something that size I'd probably use 0.2mm layer height not 0.3.
Also do you have a print area cooling fan ?
Good idea to use one - particularly with very small items.
And what filament are you actually using ?
Extruder Temps would suggest abs while bed temps would suggest pla, although too cool. (should be 60 for pla).
So that's a little confusing. 235 is way too hot for extruding pla and too cool for pet-g and abs. While bed temp is way too cool for abs and petg and slightly too cool for pla.
Also what surface are you printing on ?
-
He's printing with TPE type filament its in the title.
The .3 is not the layer height its the initial layer height in cura
235 is fine for the tpe temps