So my Ninjaflex prints are coming out fantastically. So much so that I am considering making this my go to material. However for this to work I need a decent, soluble support material. PVA? Any recommendations?
Printable View
So my Ninjaflex prints are coming out fantastically. So much so that I am considering making this my go to material. However for this to work I need a decent, soluble support material. PVA? Any recommendations?
try pva, or the new polymaker support material
http://shop.3dfilaprint.com/polysupport-248-c.asp
https://www.youtube.com/watch?time_c...;v=fjiYoAAipVQ
But what was your mod that made ninjaflex work ???????????????
This is about the 5th time of asking :-)
Dude, ninjaflex works fine. What's the problem?
only green ninjaflex works on an unmodified creator :-)
actually at the moment I'm using flexismart on the knp - which does have modified extruders (well better ones anyway), which is very good stuff and polyflex on the creator.
But I do have a bunch of red ninjaflex and filaflex that just won't feed on either machine.
For now I simply opened up the 'output' hole on the extruder and inserted a teflon tube which had one end end cut to the shape of the extruder gear. Once I get a gap I will remake the entire extruder gear plate out of aluminium with the necessary modification in the gear zone.
I get it, yeah that's a good idea ! Got some spare teflon tubes around I can play with. Cheers :-)
And NO ninjaflex will not work as support for itself - that stuff sticks like glue to itself. You'd never be able to remobe supports.
That Polymaker video was very very interesting. Methinks I shall be purchasing some as soon as the pressure is off. That looks like truly amazing filament!