Z-Axis Drifts Up as it Moves to the Right (Hictop)

5 Attachment(s)

Can anyone explain why my nozzle gets further away from the bed the farther to the right it goes? It's a Hictop3DP-17 with auto-leveling printing with Cura 15.04.6. Attempting to print Baby Groot. I've included pics of the start and end code as well as the output in Pronterface after auto-leveling. There are also pictures of the first layer, which you can see looks pretty good on the left side and middle, but the right side gets stringy and doesn't adhere to the bed. I've checked level on the x-axis rods and the bed and everything looks good. Any advice would be greatly appreciated.

Attachment 10208 Attachment 10209 Attachment 10210 Attachment 10211 Attachment 10212

4 Attachment(s)

Here's a few more pics.

Attachment 10213 Attachment 10214 Attachment 10215 Attachment 10216

Move the model to another area of the bed and see what happens. also you can rotate it like 90 degrees. I would rerun Z calibration/leveling also.