4 Attachment(s)
X-Idler Top Plate *.stl file
This is the top plate of the Prusa i3 X-Idler:
Attachment 1038
which is located here: Attachment 1039
The long screw goes through this plate and activates the Z-axis endstop switch can come break out from the plate because it is too close to the edge of the plate. I have created an *.stl file of this plate and produced this:
Attachment 1040
The large hole is for the threaded rod to go through and the smaller, 3mm is for the long screw.
Here is the *.stl file:
Attachment 1041
Old Man Emu